Search This Site

How to Reset Canon PIXMA MP237 Printer

How to Reset Canon PIXMA MP237 Printer

52 Comments , , , , Edit
Canon PIXMA MP237 Printer
Canon PIXMA MP237 Printer

Almost all Canon printers with Continuous Ink Supply System (CISS) are still getting cartridge error, and mostly needed to be replaced with new Cartridges, the most common error "Support Code: 1700" meaning the Ink Absorber is almost full, and need to be reset. 

 Here's what we should do in order to solve the error code.

Download first the Service tool for Canon MP237 or the Resetter program Click Here

After having the service tool. Go to the Printer and Turn it off.

After turning OFF,
2. Press and Hold the STOP/Reset button then Press and hold the Power button
3. Release the STOP/Reset button ( Don't release the Power button )
4. Press the STOP/Reset button Six (6) times
5. Release the Power button
6. It will display/show black.

The computer then will recognized a new device and ask to intall. Just click Cancel and locate the service tool that you've download recently.

 On the Service Tool, just follow the example below as shown.


After performing the above task, turn off the printer and turn it on normally, you can now continue printing. If the printer is blinking at cartridge, consider replacing with a new genuine cartridge for Canon MP237 with Cartridge No. 810 for Black and 811 for Colored




Thanks! hope it helps!

Also Learn to Reset Canon MP287 Printer
Disclaimer: The program (Service Tool)is not my own. Download it at your own risk. Mavtech will not be held responsible for any damages caused  to your device.


SHARE
    Blogger Comment
    Facebook Comment

52 comments:

  2. paano naman yun error 5100 pls help thanks!

    ReplyDelete
    Replies

    1. 5100 error code on canon printer, might have some small pieces staple wires, paper clip or simple paper jam, to fix this, you much search your printer's roler and clean it up.

      Delete

  3. Ok lang ba ireset ko yung printer namin? di kasi magprint yung magenta na nasa pagitan ng light magenta at cyan,

    ReplyDelete
    Replies

    1. Try nyo muna mag deep cleaning
      Step 1
      Click "Start" from your Windows desktop and click "Devices and Printers."
      Step 2
      Right-click your Canon printer and click "Properties."
      Step 3
      Select the "Maintenance" tab and click "Deep Cleaning." Your printer will run, Wait until a message displays job is complete.

      Delete

  4. pag ayaw lumabas ng black ink pero pag colored meron.. kahit nakailan beses na ako mag deep clean at linisin yun lack cartridge ng tissue with alcohol? consider na ba talaga need palitan yun black cartridge?

    ReplyDelete
    Replies

    1. Hello sir, you need to replace it with new cartridge na po...

      Delete

  5. Another Brother multipurpose Printer machine,the MFC440CN shading inkjet printer is a one of a kind name with its components like an auto-archive feeder and stand-alone faxing including an Ethernet interface so you can impart it to others on your system. https://800support.net/printer-support/hp-printer-support/

    ReplyDelete

  6. nagnozzle check ako several times. even yung ink nagfloflowback po. nung tanggalin ko ang cartridge para linisin following the steps sa youtube ang lumalabas na e di marecognize and cartridge. Ngayon nagbliblink na ung black ink, coloreded ink at yung parang triangle. does it mean sira na ang cartridge?. canon mp 237 po gamit ko

    ReplyDelete

  7. kung irereset ko maaayos pa po ba??

    ReplyDelete
    Replies

    1. Hello po, try nyo po ireset, pag nagblink pa ang black or colored. Bili napo kayo ng bagong cartridge

      Delete

  8. Kpg ung mismong cartridge po hndi ngmomove ibig sbhn po b nid xa i reset?

    ReplyDelete
    Replies

    1. No need to reset if you replaced the ink cartridge :)

      Delete

  9. hi po, pano pag 5x blinking yung color and triangle na light? ano dapat po gawin?

    ReplyDelete
    Replies

    1. Hello po.. try to take the cartridges tpos ibalik agad..baka lang not properly installed ang cartridges... or if old na ang cartridges.. you might consider to replace with new one.

      Delete


  10. http://www.celebratejobs.com/
    http://celebratejobs.com/ are the leading manpower consultancy located in Delhi/NCR can help you with the best jobs as per locations and requirements

    ReplyDelete

  11. Hello sir.yung canon pixma mp327 ko dn.hndi ngpprint lumalabas support code 1401.
    Printing cannot be executed because the ink cartridge may not be installed properly..

    Ano po prob pg ganyan.tpos ngbblink ung black and colored light saka ung triangle n error.

    ReplyDelete
    Replies

    1. try mo tanggalin ang cartridge tapos punasan ng tissue then ibalik uli..

      Delete

  12. Hello sir..paano po kapag nag-ga-grab agad ng paper ung canon mp237 kpg kaka-plug lng nung saksakan..tpos nagbliblink din sabay sabay yung lahat ng buttons??ano pong problema dun??

    ReplyDelete

  14. sir ayaw po mag print ng canon pixma mp237 new naMAN po ang cartridges ko. tapos nag download po akO NG SERVICE TOOL nag error 006 po.
    ANO po gagawiN Ko?

    ReplyDelete
    Replies

    1. Sir, san po kayo nagdownload ng service tool? dito rin ba? baka lang my na miss kayong step or hindi compatible ang driver sa printer. try to uninstall sa printer driver tpos re download sa printer driver.. thanks

      Delete

  15. paano po malalaman kung sira na yung cartridge?

    ReplyDelete

  16. hi sir u have canon mp237, gnwa ko ung procedure mo sir pero nagbblink prin ung colored at black cartridge, and then nagtry ako mgprint test page nagprint naman sya kaso continues parin ung blink ng colored at black nia, need na ba palitan or any options? thanks po sir

    ReplyDelete

  17. hi sir share ko lang po experience ko bout this mp237 canon printer, my problem is nagbblink ung 2 ink indicator, by then ngpalit ako ng cartridge colored and black, naka CISS ako, then after ng installation k ng new cartridges, npansin ko nagbblink prin ung 2 ink indicator, but nagtry ako na ipress ung stop/reset button ng 5 to 10 seconds, then ngprint sya, malabo noong una ang output so nag deep cleaning ako for about 5 to 10 times, then ngprint ulit ako lmabas ulit ung error code na 1868 at press ulit ako ng 5 to 10 seconds sa stop/reset, and then nagprint na ulit sya by now sobrang solid na ng colors at malinis, then print ako ng marami wla ng lumalabas na any errors, but continues parin ang blinking ng 2 ink indicator, which is normal naman siguro kapag naka CISS ka. hoping na mkatulong sa iba ang nashare ko maraming salamat po.

    ReplyDelete
    Replies

    1. Thanks for sharing.. kailangan mu nang palitan ang cartridge kapag hindi na maganda ang output ng print kahit ilang beses ka nang mag deepclean.

      Delete

  18. Thanks for sharing. It works for me.

    ReplyDelete
    Replies

    1. Welcome sir, thanks for dropping by.

      Delete

  19. search and found this one. salamat at malaking tulong.

    ReplyDelete

  20. thank you sir!!! hehe sakto naayos at nakapagprint ng papers ko. God bless you po!!!

    ReplyDelete

  21. the service tool is not responding after I click main or EEPROM, whats the problem please ?

    ReplyDelete

  22. hello mp237 po yung samin kaso di sya CISS. compatible parin kaya tong procedure na to??

    ReplyDelete
    Replies

    1. Hi Fleurette, Yes! try downloading the service tool and reset your printer. Thanks

      Delete

  23. sir nag reset po ako pero nag bliblink parin po . ano po ibig sabihin non ? nareset ko na po ba or fail ?

    ReplyDelete
    Replies

    1. Baka need to replace new cartridge..

      Delete

  24. Sir pano ulit pag ung black ink ang nagbblink pero nagpprint naman ng black. Pano mawala ung blink

    ReplyDelete

  25. Working po ba yung resetter sa mp287?

    ReplyDelete

  26. yung samin nmn black and yellow lang ang ink na lumalabas pag nagpiprint, nagrefill na kmi pero ayaw pa rin lumabas ng blue at magenta. wala nmn error na lumalabas. need na po kya palitan ang cartridge?

    ReplyDelete
    Replies

    1. try ink flashing once..then deep clean 3 times.. pag ayaw parin.. Replace new cartridge.

      Delete
  27. Replies

    1. try to replace the usb wire and make sure to follow carefully the instructions

      Delete

  28. Good day sir, ano po problema kapag yung print na inilalabas nya ay napuputol? MP237 user din po ako. Thanks.

    ReplyDelete

  29. try mo mag head cleaning 3-4times

    ReplyDelete

  30. Sir pwede ba to gawin sa error support code 6000? ayaw kasi mag print, laging lumalabas yang error na yan, ano po kaya pwede gawin? parang naka stucked po yung mga cartridge sa right side. hindi gumagalaw. thanks

    ReplyDelete

  31. Ask ko sana. Napalotan na ung roller feeder ng mp237 canon pixma nmn tapoz nung bumalik problema pa dn nya yung pag eject ng paper na wlang print tpoz pag sa copying nmn ayaw nya maka 3 beses na mag eeject ng papel bago magcopy same as sa printing. Ano kaya problema?

    ReplyDelete

  32. Ask ko sana. Napalotan na ung roller feeder ng mp237 canon pixma nmn tapoz nung bumalik problema pa dn nya yung pag eject ng paper na wlang print tpoz pag sa copying nmn ayaw nya maka 3 beses na mag eeject ng papel bago magcopy same as sa printing. Ano kaya problema?

    ReplyDelete

  33. Ask ko sana. Napalotan na ung roller feeder ng mp237 canon pixma nmn tapoz nung bumalik problema pa dn nya yung pag eject ng paper na wlang print tpoz pag sa copying nmn ayaw nya maka 3 beses na mag eeject ng papel bago magcopy same as sa printing. Ano kaya problema?

    ReplyDelete

  34. Im using canon pixma mp237 kpag inoopen ko ung cover hndi nag momove ung cartridge nya. Diba dapat gigitna ung cartridge nun?

    ReplyDelete

  35. gud pm boss.. ung printer ko na reset ko n pero nka ilaw p dn ung color and black light indicator pero hndi ng bblink converted lng sa continuous akn palit n dn cartridge.. nalabas lagi pg ngpprint ay ink running low pero mgnda p nmn print out.. aus lng b gamitin p dn?? kc baka masira agad kapapalit ko lng cartridge

    ReplyDelete

Subscribe to: Post Comments ( Atom )